1. Burny 5 Manual
2. Burny 5 Operation And Maintenance Manual

Jun 22, 2016.

• Supported by Burny’s extensive staff of experienced in-house engineers and service technicians, the PHANTOM is ready to perform for you today! As a premium member of the Burny family of numerical controls, the Burny PHANTOM continues a 35-year history of improving the productivity and increasing the profi ts of our worldwide customer base.
• A 'Plus' Field Upgrade Kit is also available for any Burny 2.5 CNC that is currently installed. Take advantage of over four times faster processing speeds by upgrading an existing Burny 2.5, Burny 2.8, Burny 2.9, Burny 1250 or Burny 1400 with 'Plus' capabilities.
• Cleveland Motion Controls (CMC), a Lincoln Electric Company, offers a broad line of industrial control and automation solutions such as Engineered Systems, Motion Controllers, Tension Controllers, Web Tension Control, Tension Transducers and Load Cells.
• Burny 8 Software for Burny CNC Shape Cutting Controllers - Duration: 8:12. Lincolnelectrictv 8,951 views. 15 - How to Make Deep Reach C Clamps All Wood only $10 Extreme Strength.

To set the CNC up for drip feed:
---drip feed not available on this control---

Set ConnectCNC as follows:

Aria canticle of the monomyth worlds pdf. NOTE: Burny does not recommend a direct cable from the machine to the computer under any circumstances!
8gcbc manual. See the manual for more information. Sims 4 outfit mods. Metro: last light redux console commands. If you don't have the manual you can get it from here. Click the 'Technical Manuals' link.

Cable Pin Out

BURNY 10 Plus and BURNY 2.5 Plus have a lot of exciting features, required for precision applications. Read more about the latest Burny CNC plasma technological features in our products.

CNC plasma machines from Burny are used all over the world. With constant innovation, Burny has revolutionized the process of cutting in the manufacturing industry. The PC controlled machines are fast replacing the old cutting machines. However, there are still many customers who are using the non-PC controlled systems. We, as authorized partners of Burny offer excellent standards of servicing & upgrading such systems.

Mp4 monster inc. Although Burny 2.5 Plus is a non pc controlled system, it is cost efficient, can handle most interfaces & upgraded easily. For applications needing industrial grade control system, the Burny 10 LCD Plus comes loaded with advanced features. It is very user-friendly, has repeatable motion storage memory and precision like none other.

product leaflet (PDF): EN

BURNY 10 LCD plus

System parameters Video duke 1 6 261 f. Mitti 1 5 52.

• able to control following processes: oxy-fuel, plasma arc and water jet cutting and other additional technologies
• based on WINDOWS XP
• built-in RCS++® ( Real Time Control System)
• integrated own diagnostics – monitors position and time when moving
• operated by hand touch on screen
• remote system diagnostics is possible to conduct by means of company intranet
• multitasking function enables preparing data when cutting

• cutting in manually or automatic mode
• testing modes: continuous, step by step
• backward running when cut with automatic cutting oxy switch-off lost
• torch setting-off in requested length (plate cutting)
• setting right the program against slewed plate
• go on position function: Start program, End program, Requested piercing, Back to cut
• software HOME position (Start sheet panel)
• hardware HOME position (re-entry into cut at outage)
• Possible stop working and following continuation

• 50 standard shapes + 100 other variants
• automatic nesting in lines, columns or under angle
• chain cutting for selected shapes
• common cutting for selected shapes
• possible creation of own shapes

• current speed
• program speed
• speed percent indication
• X and Y axis position (absolute, relative )
• program part name
• active mode
• X,Y,I,J – dimensions with 0.001 accuracy
• error reporting
• graphic display with ZOOM + – 64x

• industrial design ( dustproof case )
• 15′ colour LCD monitor
• touch screen
• membrane buttons START, STOP, BACK UP, GOTO
• 8 – direction joystick
• USB port, covered Floppy Disc Drive

• Intel processor Intel 2 GHz
• main memory DIMM – 1 GB
• hard disk – 80 GB
• 15′ colour LCD touch screen
• USB port, Floppy Disc Drive

• metric or inch units
• various program formats (ESSI, EIA RS)
• program editing
• program conversion
• program scale
• program rotation
• program reflection
• rows and columns definition
• sheet dimension setting
• message insertion into program
• cut compensation
• cutting speed
• piercing delay
• preheat time with memory
• automatic tool setting-offnástrojů

• wireless communication
• optical cable communication
• machine operation Manager
• DXF file loading
• automatic nesting
• piercing ramp definition
• initiation of own applications

• floppy drive
• RS 232 * serie line
• connecting with company intranet *
• internet – TCP/IP protocol*
• USB port

BURNY 2.5 plus

Burny 5 Manual

Basic equipment

Burny 5 Operation And Maintenance Manual

• membrane keyboard
• keyboard sound indication
• 16 – point display
• 2-axis operating (3-axis)
• 50 standard shapes
• program transfer from PC into controller via RS 232 and RS 422 serial interface
• storing controller program into PC
• creating and editing the programs by keyboard
• kerf compensation setting
• manual, automatic or testing mode selection
• material preheat set-up time
• pasma and oxy-fuel cutting delay set-up time
• display speed indication
• display instantaneous torch position indication
• automatic acceleration and deceleration in angles
• return into initial position
• magnification and reduction in scale from 0,001 up to 65
• automatic program adaptation against situated plate
• mirror copy in both axis
• program rotation with 0,01 degree increase